Complete BCS 2 Gas with RIMS Kit

No reviews. Leave a review
$950.00
Current Stock:
Add wireless networking (required)

Let us help you get started on you endeavor to build your brewery. As we build these as well, we have all the parts you need to build your brewery in one location. Give us a few days to assemble and package all the parts you need to build your own automated gas brewery.

Save yourself time and effort, while also reducing the tools needed to build your brewery.

Usual lead time is 10-14 days, as each package is made to order



Let us help you get started.

The kit includes:

Basic Kit Hardware

  • 11 - LEDs (2 white 110v, 2 white 24v, 1 white 220v, 2 blue 110v, 1 red 110v, and 1 green 220v)
  • 1 - Emergency Stop locking push button with NC Contact
  • 3 - 3-Way Yellow/Orange LED Toggle switch for gas (auto - off - on)
  • 2 - 3-Way Switches with NO Contacts for pump (auto - off-on)
  • 1 - 2-Way Switches with NO Contact for alarm output
  • 11 - Additional NO Contacts for back of 3 way switches
  • 1 - Key toggle Switch for panel on/off
  • 2 - 63a DIN Contactor w/ 110v Coils for main power
  • 1 - 24vac Power Transformer - Honeywell AT72D1683
  • 1 - 3 SPDT Relay DIN Mount relay boards for output control of gas, pumps and alarm
  • 1 - 2 SPDT Relay DIN Mount relay boards for output control of gas, pumps and alarm
  • 1 - 40a Solid State Relay (SSR) for element output
  • 1 - External mount, small form, heat sink
  • 1 - 2x 1/3m cuts, and 1 1/6m cut, of DIN rail (pre-installed in pre-cut enclosures)
  • 21 - Terminal Blocks for wire from 6-24 awg
  • 1 - 16a 1 pole DIN Rail Breaker
  • 1 - 32a 2 pole DIN Rail Breaker
  • 10 - Terminal block anchoring ends
  • 3 - Terminal block end covers
  • 2 - Terminal block separators
  • 2 - Terminal block connecting bridge pieces

Enclosure and outlets

  • 1 – Enclosure either pre-cut and drilled or not
  • 2 – L5-15 Flanged outlets for pumps
  • 1 – L5-15 flanged inlet for main power supply
  • 2 – L5-15 mold cords with plugs for pumps
  • 1 – L6-30 Flanged outlet for element
  • 4 – XLR Male connectors for temperature input (BCS460)
  • 8 – XLR Male connectors for temperature input (BCS462)
  • 2 – 4-pin XLR Fe-male connectors for gas valve output
  • Tags for panel include:
    • Power / Off-On
    • Stop
    • Input
    • Alarm / Off-On
    • HLT Flame / Auto-Off-On
    • RIMS Element / Auto-Off-On
    • Boil Flame / Auto-Off-On
    • Water Pump / Auto-Off-On
    • Wort Pump / Auto-Off-On
    • HLT
    • RIMS
    • Boil
    • Water Pump
    • Wort Pump
    • HLT Probe
    • Mash Probe
    • Boil Probe
    • KO Probe
    • Fermentor 1/Temp Probe (BCS462)
    • Fermentor 2/Temp Probe (BCS462)
    • Fermentor 3/Temp Probe (BCS462)
    • Fermentor 4/Temp Probe (BCS462)
    • 120v / 16a

Temperature Controller and probes

  • BCS460
  • 3 - 4" BCS Temp probe with 8' lead wires
  • 1 - 6" BCS Temp probe with 8' lead wire
  • 4 - 1/2" MPT to 1/4" Bored through compression fitting
  • 4 - 1/2" NPT Lock Nut
  • 4 - 1/2" Washer
  • 4 - O-rings

Wiring and wire fittings

  • 24 ft of black 14 gauge wire
  • 4 ft of red 14 gauge wire
  • 16 ft of white 14 gauge wire
  • 12 ft of red 18 gauge wire
  • 24 ft of yellow 18 gauge wire
  • 12 ft of orange 18 gauge wire
  • 12 ft of brown 18 gauge wire
  • 24 ft of blue 18 gauge wire
  • 12 ft of purple 18 gauge wire
  • 10 ft of white 18 gauge wire
  • 10 - #10 Yellow Spade connectors for 10ga wire connections on SSR relays
  • 100 - #6 Blue Spade Connectors for most 110v wiring throughout the panel
  • 50 - #6 Red spade connectors for the low voltage and temp probe wiring
  • 5 - #10 Blue ring connectors for grounding wire on enclosure posts
  • *wire cuts may be subject to updates as we simplify the process.

 

*** Enclosure Information ***

  • Painted Enclosure is included. The included enclosures has no cuts made to the box requiring and therefore allowing you to design and build your system to your preference.
  • Pre-cut Painted Enclosures uses our current Assembled enclosure layout, is CNC cut out of the painted box and then we drill and tap all necessary holes for easy hardware mounting. The paint on the enclosure is likely to have some marks and may even be loose at some edges; we highly recommend you plan on sanding and painting with your choice of paint.
  • Stainless enclosure. Same as the standard painted option, but instead we send a 304 Stainless enclosure.  
  • Pre-cut Stainless enclosure is the equivalent of an enclosure straight from our cut stack for the assembled panels, these are cut, cleaned, drilled and tapped.

All kits include a printed copy of our wiring guide book.  Additional content is made available at learn.ebrewsupply.com

 

Tools you will need include:

  • Wire Cutters
  • Wire strippers
  • Crimping tools for spade and ring connectors
  • Phillips screw driver(s)
  • Flat head screw driver(s)
  • Zip ties and zip tie bases (optional)
  • Labeler or other means to tag wires

If you are cutting your control panel

  • 7/8" Hole saw or step bit for LEDs and switches
  • 3/4" hole saw for XLR panel connectors
  • 1-1/2" hole saw for flanged pump outlets
  • 2-1/8" hole saw for flanged element outlets
  • Dremel or other rotary tool for cleaning up edges
  • Angle grinder or rotary tool for cutting heat sink hole(s) in top

Sand paper and paint recommended

No one has reviewed this product! Write a Review

Related products

Customers also Viewed