30a PID Complete Control Panel Kit

$950.00
Share

Let us help you get started. 


Note an update to switches, for simplicity sake and to provide you options in your build, we now ship both the 2-way toggle, the 2-way blue LED toggle, and the 2-way push button switches in any complete kit order.

Let us help you get started.

Build a complete 30a PID control panel using our complete package.  Here we provide the parts you need to build an electric brewing panel from the box out. The resulting panel should be a near complete version of the panels we build and sell.  All the hardware and wire you may need to get your panel built is shipped in for one price.

The kit includes:

Basic Kit Hardware

  • 8 - LEDs (2 white 220v, 2 yellow 110v, 2 blue 110v, 1 red 110v, and 1 green 220v)
  • 1 - Alarm Buzzer LED
  • 1 - Emergency Stop locking push button with NC Contact
  • 1 - 3-Way Switches with NO Contacts for element select
  • 2 - 2-Way Switches with NO Contacts for pumps (on-off)
  • 2 - 2-Way Toggle style Blue LED Switches with NO/NC Contacts for pumps (on-off)
  • 4 - 2-Way Switches with NO Contacts for alarms (on-off) (1x switch for alarm in pre-cut design)
  • 1 - Additional NO Contacts for back of emergency stop
  • 4 - Additional NC Contacts for back of 3-way and 2-way switches
  • 1 - Key toggle Switch for panel on/off
  • 1 - MK2P-NS AC110 General Purpose Relay for safe power up
  • 3 - 63a DIN Contactors w/ 110v Coils for main power and for element control
  • 2 - 40a Solid State Relays for BCS control of elements and pumps
  • 1 – Large pre-drilled and tapped heat sink for element SSRs
  • 1 meter of DIN rail cut in 1/3m increments
  • 25 - Terminal Blocks for wire from 6-24 awg
  • 1 - New style 32a 2 pole DIN Rail Breaker
  • 1 - New style 6a 1 pole DIN Rail Breaker
  • 12 - Terminal block anchoring ends
  • 4 - Terminal block end covers
  • 4 - Terminal block separators
  • 3 - Terminal block connecting bridge pieces

Enclosure and outlets

  • 1 – Enclosure (either painted or stainless steel)
  • 2 – L6-30 Flanged outlets for elements
  • 2 – L5-15 Flanged outlets for pumps
  • 1 – L14-30 flanged inlet for main power supply
  • 2 – L5-15 plugs for pumps
  • 1 – L14-30C Connector for main power supply
  • 3 – XLR Male connectors for temperature input
  • Tags for panel include:
    • Power / Off-On
    • 4 x Alarm / Off-On (1 x Alarm/Off-on for pre-cut design)
    • Stop
    • Element Select / Boil-Off-HLT --OR-- Element Select / HLT-Off-Boil
    • Water Pump / Off-On
    • Wort Pump / Off-On
    • 2 x HLT
    • 2 x Boil
    • Mash
    • Water Pump
    • Wort Pump
    • HLT Probe
    • MASH Probe
    • Boil Probe
    • 240v / 50a
    • 120v / 6a

PID Temp controller, PID Timer and temperature probes

  • 3 - Love 16C (SSR Output) PID Temperature control units
  • 1 - LCT216 timer
  • 3 - 1/2 inch MPT x 1-1/2 inch RTD100 Temperature Probes with 6 ft cables**
  • 3 - 1/2 inch Locknuts
  • 3 - 1/2 inch washer and o-rings
  • 3 – XLR Female connectors for temperature probes
  • 30 ft of 1/8 inch braided poly sleeve for temperature probes
  • 3 cuts of 4 inch x 1/8 inch heat shrink tubing for temperature probes

Wiring and wire fittings

  • 6 ft Range style main power cable with 14-30 end
  • 15 ft of black 10 gauge wire
  • 15 ft of red 10 gauge wire
  • 10 ft of green 10 gauge wire
  • 30 ft of black 14 gauge wire
  • 4 ft of red 14 gauge
  • 20 ft of white 14 gauge wire
  • 4 ft of yellow 14 gauge wire
  • 4 ft of orange 14 gauge wire
  • 4 ft of blue 14 gauge wire
  • 4 ft of purple 14 gauge wire
  • 12 ft of pink 14 gauge wire
  • 24 ft of red 18 gauge wire
  • 18 ft of yellow 18 gauge wire
  • 18 ft of orange 18 gauge wire
  • 20 ft of white 18 gauge wire
  • 4 ft of tan 18 gauge wire
  • 10 - #10 Yellow Spade connectors for 10ga wire connections on SSR relays
  • 100 - #6 Blue Spade Connectors for most 110v wiring throughout the panel
  • 50 - #6 Red spade connectors for the low voltage and temp probe wiring
  • 5 - #10 Blue ring connectors for grounding wire on enclosure posts

*** OPTIONAL UPGRADES ***

  • Pre-cut painted enclosure ($50) - highly recommend planning to paint upon receipt.
  • Stainless steel enclosure (add $150)
  • Stainless steel Pre-Cut enclosure as pictured (add $250)

Note that pre-cut enclosure typically can add 3-4 days to delivery as portions are made to order

 Package also includes a printed copy of our wiring guide.

Tools you will need include:

  • Wire Cutters
  • Wire strippers
  • Crimping tools for spade and ring connectors
  • Phillips screw driver(s)
  • Flat head screw driver(s)
  • Zip ties and zip tie bases (optional)
  • Soldering Iron for temp probe assembly

If you are cutting your control panel

  • 7/8" Hole saw or step bit for LEDs and switches
  • 3/4" hole saw for XLR panel connectors
  • 1-1/2" hole saw for flanged pump outlets
  • 2-1/8" hole saw for flanged element outlets
  • 2-1/4" hole saw for flanged inlet for power supply
  • Dremel or other rotary tool for cleaning up edges
  • Angle grinder or rotary tool for cutting heat sink hole(s) in top

Sand paper and paint always recommended for painted enclosures.

30a PID Complete Control Panel Kit Reviews

Based on 1 review

30 Amp 2-element kit

Posted by Charlie Smith on May 12th 2016

This control panel kit is complete with everything you need to get you up and brewing. When you receive the kit it looks intimidating but if you take it step by step it is fairly easy. Ryan is super with answering any questions or problems you may run into. Don't rush it, take your time and double check your wiring.
I am actually thinking of buying another kit to build for my son who is just getting into electric brewing. One thing I would like to mention is their customer servicer is 5 star and they make you feel like there are no stupid questions.
Thanks
Charlie Smith
Chicken House Brewing