30a PID Complete Control Panel Kit

Price
$ 1,350
Taxes and shipping calculated at checkout
HLT Probe: NPT Probe
Mash Probe: NPT Probe
Boil Probe: NPT Probe

Frequently Bought Together

Made to order

Approximately 1 week lead time. Please reach out to confirm the latest.

Free Shipping

Free Ground to USA residents in the contiguous 48

Email and Phone Support

Contact us via contactus@ebrewsupply.com anytime with your questions or for support.

Proudly made in the USA

All our control panels are designed and assembled in Chassell, Michigan. We strive to use as much USA made product in our panels as we can.

Specifications

Build yourself one of the best home brewing control panels you can. Featuring the highest quality, US made stainless steel enclosure with the thickest walls of any, and high quality hardware throughout the inside. Electric Brewing Supply's EBSP200 series PIDs on the front provide a clear, accurate, and easy to use means to measure and control temps, insuring a smooth brew day.  Increase your success with repeatability and accuracy unmatched by any smaller setup. 

This particular controller is designed for controlling 2 elements , interlocked limiting use to one element at a time. Perfect for even the most experienced home brewer.

Trust your system to last for you, while also knowing that the hardware is industrial standard, making for fast and easy repairs in case something does happen.

Built using the highest quality parts that we have come to rely on from trusted manufactures such as ABB, Phoenix Contact, and more.

Quickly mount it using an industry standard TV mount, VESA 200 spec.  No more searching for the right piece of wood or metal channel.  Quickly mount it to your wall and set it to brew.

Don't forget to check out the recommended accessories tab for frequently added items.

Average lead time is approximately 1 week

5-30 gallons   120v/220v US Ver

 

Assembly Required
The kit includes

Basic Kit Hardware

  • 6 - LEDs (2 white 220v, 2 yellow 110v, 1 red 110v, and 1 green 220v)
  • 1 - Alarm Buzzer LED
  • 1 - Emergency Stop locking push button with NC Contact
  • 1 - 3-Way Switches with NO Contacts for element select
  • 3 - 2-Way Toggle style Blue LED Switches with NO/NC Contacts for pumps (on-off)
  • 1 - 2-Way switch for alarm
  • 1 - Additional NO Contacts for back of emergency stop
  • 4 - Additional NC Contacts for back of 3-way and 2-way switches
  • 1 - Key toggle Switch for panel on/off
  • 1 - General Purpose Ice-Cube style Relay for safe power up
  • 3 - 63a DIN Contactors w/ 110v Coils for main power and for element control
  • 2 - 40a Solid State Relays for elements
  • 1 – Large pre-drilled and tapped heat sink for element SSRs
  • DIN Rail pre-installed on sub panel
  • Phoenix Contact Terminal Blocks for wire from 6-24 awg
  • 2 - 32a 2 pole DIN Rail Breaker
  • 1 - 6a 1 pole DIN Rail Breaker
  • Phoenix Contact Terminal Block clip style anchoring ends
  • Phoenix Contact Terminal Block end covers
  • Terminal bridge jumpers

Enclosure and outlets

  • 1 – Enclosure (pre-cut US-Made stainless steel)
  • 2 – L6-30 Flanged outlets for elements
  • 2 – L5-15 Flanged outlets for pumps
  • 1 - 5-15 Auxilary side mount outlet
  • 1 – L14-30 flanged inlet for main power supply
  • 1 – L14-30C Connector for main power supply
  • 3 – XLR Male connectors for temperature input
  • Complete tag kit

    PID Temp controller, PID Timer and temperature probes

    • 3 - EBSP200 (SSR Output) PID Temperature control units
    • 1 - EBST200 PID Timer unit
    • 3 - Temperature probes per selection
    • 3 - Temperature probe cables (Red, Blue and Black when available)

    Wiring and wire fittings

    • Molded 14-30 to L14-30 Power Cable
    • Black 10 gauge wire
    • Red 10 gauge wire
    • Green 10 gauge wire
    • Black 14 gauge wire
    • Red 14 gauge
    • White 14 gauge wire
    • Yellow 14 gauge wire
    • Orange 14 gauge wire
    • Blue 14 gauge wire
    • Purple 14 gauge wire
    • Pink 14 gauge wire
    • Red 18 gauge wire
    • Yellow 18 gauge wire
    • Orange 18 gauge wire
    • White 18 gauge wire
    • #10 Yellow Spade connectors for 10ga wire connections on SSR relays
    • #6 Blue Spade Connectors for most 110v wiring throughout the panel
    • #6 Red spade connectors for the low voltage and temp probe wiring
    • #10 Blue ring connectors for grounding wire on enclosure posts
    • Approx. 50 Nylon Adhesive Back Cable tie bases (zip tie base)
    • Nylon cable ties (1/8" x 4.1")

     Package also includes a printed copy of our wiring guide.

    Tools you will need include:

    • Wire Cutters
    • Wire strippers
    • Crimping tools for spade and ring connectors
    • Phillips screw driver(s)
    • Flat head screw driver(s)

    Important note, while we are a UL control panel shop, these kits cannot be UL Listed only products we expressly build and state as such on our site are UL listed. This is especially important to note for those intending to use this for commercial purposes within the US or in Canada.

    Videos

     

    Panel Specs
    PID Controllers EBSP200 Temperature Controllers
    Full load amperage: 25.3 amps @ 240v
    Max Output:  (1) 5500w Elements and (2) Brewery Pumps @ 1.2 amps
    Power outlet: 14-30 Range style, requiring Neutral and Ground
    Power cord: 6 foot molded cord with L14-30 connector
    Power in:

    L14-30 Flanged inlet, 240v with ground and neutral. 

    Panel uses and provides 120v for control and for pumps

    Panel outputs:

    (2) L6-30 flanged outlets for elements

    (2) L5-15 flanged outlet for pumps

    (1) Side 5-15 auxiliary outlet

    Panel inputs:

    (3) XLR inputs with QC variant cables for NPT and TC probes 

    Enclosure:

    Stainless Steel Nema 4x Enclosure

    16ga Enclosure Walls, 14ga Enclosure door thickness

    16 in (W) x 18 in (H) x 8.5 in (D)

    400mm x 450mm x 225mm

    UL Listed enclosure only

    VESA 200x200 Mounting points, 6mm-1 screws on back

    Included in the box:

    (1) Control Panel

    (1) Power cord for panel

    (3) Temp probe cables

    (X) Temp probes dependent on selection

    Certifications: Controller is not certified UL
    Point of origin:

    Terminal blocks, relays, breakers and power from EU

    PID Controllers, outlets, contactors and SSRs from China

    Enclosure and Heatsink are US Manufactured

    Warranty: 30 day parts

    All kits are assembled by Electric Brewing Supply, in Chassell, Michigan from globally sourced parts.

     

    EBSP 200
     

    Introducing the all new Electric Brewing Supply EBSP200 Next gen PID Controller.  Active display for easy read, large digits for reading from a distance.

    Backlit display with alert indicators.

    Digital PID Temperature Controller, Auto/Manual Control function

    PID Auto-tuning

    Alarm output function

    Output: Relay our SSR Drive

    Digital PID Temperature Controller
    Dual display,4 digits,7 segments LED display
    0.3%F.S Measuring accuracy
    Bar graphic display indication
    Celsius or Fahrenheit display
    Universal Input(TC,RTD,Analog)
    Relay/SSR Drive
    Auto/manual control
    1 alarm
    Power supply: 85~265Vac 50/60HZ

    Our exclusively designed and built, backlit display timer unit.  Designed for the sole purpose of count down or count up times.

    Simple control use.

    Alarm output, multi step capable.

    Alarm only (no temp control)

    Relay Output only

    Power supply: 85~265Vac 50/60HZ

     

     

    Probe Spec
     NPT Style Probe

     

    Tri-Clamp Style Probe

     

    NPT Are also available in 4 and 8 inch lengths

    Tri-Clamp are also available in a 7 inch length

     

    Accessories
     

    Assembled Tri-Clamp Element for heating

    Available starting at $190 Each

    Shop for now

    L5-15 to 5-15 jumper cables

    Recommended for between the pump and your panel.  

    Available for $15 each

    Shop for now

    Heavy Duty VESA 200x200 Fixed Wall Mount

    Recommended for quick and easy mounting of your control panel.

    Available for $30 each

    Shop for now

     

    Downloads
    Downloads

    LCD PID temp readings

    Clear and easy to read

    Easily see your temperatures and set them with our EBSP200 PIDs. Solid, stable, reliable, and easy to use. No convoluted menus to navigate.

    EASY Assembly

    Pre-Drilled & Tapped

    All the holes on the bottom of the enclosure are pre-drilled, and prepped for fast installation. Screws are installed in our shop so you know what goes where. The back of the enclosure is prepped for the VESA mounting as well.

    INCLUDED

    Probes included

    Included in the price is our high quality RTD/PT100 probes. Select between 1/2 NPT threaded probes or 1.5" Tri-Clamp probes.

    Easily mounted

    Mount your panel quickly using an industry standard 200x200 VESA TV wall mount. No more guess work involved, find your stud, mount the wall bracket and then, your panel.

    Proudly made in the USA

    All of our control panels are made right here in the USA. With support and technical help provided by the same folks who designed and built the panel for you.

    Recommended for You